Thermal Grizzly Kryonaut, High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles -1.0 Gram

I was having trouble with my 5 Years old laptop. CPU & GPU temperature was rising to 80 - 85 C within a few min and with hardly any load, and while gaming 100 C in just a few min. Fan running at 100 % Also was of no help. Thermal throttling, FPS Drop, Inconsistent performance, etc. was very common.I decided to replace the thermal paste, as Heatsink and Fan were already cleaned and the thermal paste was replaced a couple of years back.Now the big task was to decide on the Thermal Paste. Arctic Silver MX4, Deep Cool Z3, Cooler Master Master Gel PRO, and Deep Cool G15 were a few products as an option along with Grizzly Kryonaut. Quantity was only 1 Gm. all other pastes were available at least 1.5 Gm or more. Due to the low quantity, the effective price was very high. Few even mentioned that it's very little and insufficient for the job. I was sure that thermal paste is required just to fill the surface gap and just a thin layer. Hence decided to take a chance and ordered Grizzly Kryonaut.Product delivered very next day. First I wanted to make sure it was a genuine product, hence straightaway headed to the manufacturer's website and verified the code. Bingo! It's verified as a genuine product.Now the actual task of applying the fresh paste. Removed the Heatsink, surprisingly the old paste was not dry, it was very much greasy, So I was not expecting a huge difference with the new fresh paste. Carefully removed all the old paste from the CPU, GPU & Heatsink. and applied just enough on the CPU & GPU (just to form a thin layer) Installed the heating. I will use the remaining paste on Mac. I am sure the 1 Gm quantity is more than enough at least for two laptops.Now the results.Before replacing the thermal paste I had run a Cinebench test so I ran the Cinebench test after replacing the thermal paste. Below are the results.Test Before AfterMulti-Core Points 3238 4014Single-Core Points 838 864M P Ratio 3.87x 4.75xMax Temperature 78 C 58 C (After running a few games for a couple of hrs.)With the old paste and fan running at 100% Hardware Info was showing CPU Temp 100 C with just 5-10 min of gaming and there was Core Thermal Throttling.With Grizzly Paste Maximum temperature is never over 80 C even after a couple of hours of gameplay and the Fan running at normal speed. And of course No Thermal Throttling.The results are unbelievable. I wouldn't have trusted this if I had not done it myself.Application is also very important. So apply just enough not too much or not too less, it should be just enough.Go for it! Highly recommended.

Really great earlier my gpu temp were reaching 74-75 degree with max usage and now it barely even goes above 68 and as for cpu it also has lower the temp, it brings down the temperature very fast.Go for it, nice product

Good thermal paste

Edit: after few days the temps got high again, I've applied the paste multiple times, but it doesn't work, I've requested for replacement but no replacement nas been done and the false replacement claims are being made, idk howI used to get 90-95 degree Celsius on my CPU when playing last of Us part 1 on my hp pavilion gaming laptop, after using some cheap thermal paste, I realized it's no use, the temps were exactly the same, so I've decided to get this since I've seen a yt short saying this is the popular thermal paste and decided to buy thisMy temps went from 90-95 before to 80-87 Degree Celsius while gaming (after applying this thermal paste)the only problem is that it's a little overpriced for it's quantityI had to apply the thermal paste twice because I messed up the first time, but quantity was already 50% completed lolI think we can use this twice or three times with the given quantity (Keep in mind I'm on a laptop, which requires less quantity than Desktop)Things to consider* Before removing the heat sink of the laptop, disconnect the battery* Take a picture of where the thermal pastes are applied, so that you can apply at the same places after cleaning the old one* Use a clean lint free cloth to clean the old thermal paste and also use isopropyl alcohol on the cloth and rub off the old paste* You can also use low percentage of isopropyl alcohol but will have to wait for it to dry off (I used 70% one, and no problems occurred)* Use the drop method, where you apply peanut sized drop on the CPU and GPU and you place the heatsink on top of it, with a straight angle, it will spread itself evenly if kept rightHighly recommend this paste as it's one time solution, and I've heard we don't need to change the paste for another 2 years, The only thing is the quantity they send you is soo tiny amount lol

nice product

temp reduction is fine, i think you should buy a cheaper thing like cooler master Cryofuze 7 or any other like Noctua NT-H1 or NT-H2 because this is just 1g in 500 inr and it is really not enough for you cpu and gpu atleast it wasn't for me, it is very thick and very hard to spread so when you spread it even with spatula its not spread easily, i read it online and i bought it thinking that i'm a pro but even for me it was very hard to spread when i tighten the nuts on my cpu after spreading it squeezes out from upon the cpu doesn't sticks or stays, it was less and i had to buy it again i spent 1000 just for i time pasting low quantity , and temps are okayish you know not as good as they say.... so i think if its your first time, definitely don't.... buy any other paste like MX-6 pro

The media could not be loaded. Very good thermal paste or I can say the best when you can buy for your laptop. Just apply a very less the patient and you will get your performance boost. Please watch the video. I have talked everything about this and what I have problem I faced and what this solved.101% vote to buy it, avoid others which comes cheaper than this

Fans sounds smooth after placing it on heat shink. Value for money product.